ZyXEL Communications G-102 Betriebsanweisung PDF herunterladen (Seite 57)

ZyXEL G-1000 v2 User’s Guide

Chapter 4 Wireless LAN 57

Figure 18 Wireless: WPA(2)-PSK

The following table describes the wireless LAN security labels in this screen.

Table 19 Wireless: WPA(2)-PSK

LABEL DESCRIPTION

Security Mode Choose WPA-PSK or WPA2-PSK from the drop-down list box.

WPA Compatible This check box is available only when you select WPA2-PSK or WPA2 in the

Security Mode field.

Select the check box to have both WPA2 and WPA wireless clients be able to

communicate with the G-1000 v2 even when the G-1000 v2 is using WPA2-PSK or

WPA2.

Pre-Shared Key The encryption mechanisms used for WPA(2) and WPA(2)-PSK are the same.

The only difference between the two is that WPA(2)-PSK uses a simple common

password, instead of user-specific credentials.

Type a pre-shared key from 8 to 63 case-sensitive ASCII characters (including

spaces and symbols).

ReAuthentication

Timer (In

Seconds)

Specify how often wireless stations have to resend usernames and passwords in

order to stay connected. Enter a time interval between 10 and 9999 seconds. The

default time interval is 1800 seconds (30 minutes).

Note: If wireless station authentication is done using a RADIUS

server, the reauthentication timer on the RADIUS server has

priority.

Idle Timeout (In

Seconds)

The G-1000 v2 automatically disconnects a wireless station from the wired network

after a period of inactivity. The wireless station needs to enter the username and

password again before access to the wired network is allowed. The default time

interval is 3600 seconds (or 1 hour).

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 197 198

Keine Kommentare

ZyXEL Communications G-102 Betriebsanweisung Seite 57