ZyXEL Communications NWD-170 - Betriebsanweisung PDF herunterladen (Seite 28)

Chapter 2 Tutorial

NWD-211AN User’s Guide

2.1.3 Before You Begin

• Make sure that you have already familiarized yourself with the NWD-211AN’s

features and hardware, as described in Chapter 1 on page 21.

• You should have valid login information for an existing network Access Point,

otherwise you may not be able to make a network connection right away.

2.2 Connecting to an AP using Wi-Fi Protected

Setup (WPS)

This section gives you an example of how to set up your wireless network using

WPS. This example uses the NWD-211AN as the wireless client, and ZyXEL’s

NBG334W as the Access Point (AP).

Note: The Access Point must be a WPS-aware device.

There are two WPS methods for creating a secure connection. This tutorial shows

you both.

• Push Button Configuration (PBC) - create a secure wireless network simply

by pressing a button. See Section 2.2.1 on page 28.This is the easier method.

• PIN Configuration - create a secure wireless network simply by entering a

wireless client's PIN (Personal Identification Number) in the NWD-211AN’s

interface. See Section 2.2.2 on page 30. This is the more secure method, since

one device can authenticate the other.

2.2.1 Push Button Configuration (PBC)

1 Make sure that your access point is turned on and that it is within range of the

computer with the NWD-211AN installed.

2 Make sure that you have installed the NWD-211AN’s driver and utility on your

computer.

3 In the NWD-211AN’s utility, click the Adapter tab, enable WPS and select PBC

(Push Button Configuration). In the screen that appears, click Start.

4 Log into the AP’s web configurator and locate its WPS settings section. On the

NBG334W, press the Push Button button in the Network > Wireless Client >

WPS Station screen.

Note: It doesn’t matter which button is pressed first. You must press the second

button within two minutes of pressing the first one.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 174 175

Keine Kommentare

ZyXEL Communications NWD-170 - Betriebsanweisung Seite 28