
Chapter 4 ZyXEL Utility - Station Mode
NWD-211AN User’s Guide
64
The following table describes the labels in this screen.
Table 12 Security Settings: IEEE 802.1x
LABEL DESCRIPTION
Encryption Type Select WEP if the access point is configured to use 802.1x with WEP
encryption. A dynamic WEP key is generated automatically.
Otherwise, select Disable (at the time of writing, this is not available in
Windows Vista).
EAP Type The type of authentication you use depends on the RADIUS server or
AP.
Select an authentication method from the drop down list. Options are
TLS, PEAP and TTLS (at the time of writing, TTLS is not available in
Windows Vista).
Login Name Enter a user name.
This is the user name that you or an administrator set up on a RADIUS
server.
Password This field is not available when you select TLS in the EAP Type field.
Enter the password associated with the user name above.
Certificate This field is only available when you select TLS in the EAP Type field.
Click Browse to select a certificate.
Note: You must first have a wired connection to a network and
obtain the certificate(s) from a certificate authority (CA).
Consult your network administrator for more information.
TTLS Protocol This field is available only when you select TTLS in the EAP Type field.
Select a TTLS protocol that the RADIUS server uses. Options are CHAP,
MS-CHAP, MS-CHAP-V2 and PAP.
Note: This feature is not available on Windows Vista.
PEAP Inner EAP This field is only available when you select PEAP in the EAP Type field.
The PEAP method used by the RADIUS server or AP for client
authentication is MS CHAP v2.
Back Click Back to go to the Site Survey screen to select and connect to
another network.
Next Click Next to confirm your selections and advance to the Summary
screen (refer to Section 4.4.2 on page 65.)
Exit Click Exit to return to the Site Survey screen without saving.
Kommentare zu diesen Handbüchern