
Chapter 4 ZyXEL Utility - Station Mode
NWD-211AN User’s Guide
59
4.4.1 Security Settings
When you configure the NWD-211AN to connect to a network with wireless
security activated and the security settings are disabled on the NWD-211AN, the
screen varies according to the encryption method used by the selected network.
4.4.1.1 WEP Encryption
Configure WEP security in this screen.
Figure 33 Security Setting: WEP
The following table describes the labels in this screen.
Network Type This field displays the network type (Infrastructure or Ad Hoc) of the
wireless device.
Network Mode This field displays the wireless standard used by the selected wireless
device. It shows B for 802.11b, G for 802.11g or N for 802.11n.
Channel This field displays the channel number used by each wireless device.
Security This field shows whether data encryption is activated (WEP, WPA,
WPA-PSK, WPA2, WPA2-PSK or 802.1x) or inactive (DISABLE).
MAC address This field displays the MAC address of the wireless device.
Surveyed at This field displays the time when the wireless device was scanned.
Table 8 Site Survey (continued)
LABEL DESCRIPTION
Table 9 Security Setting: WEP
LABEL DESCRIPTION
Security
Settings
WEP Select 64 Bits or 128 Bits to activate WEP encryption and then fill in
the related fields.
Authentication
Type
Select an authentication method. Choices are Open and Shared.
Refer to Section 3.3.1.1.2 on page 44 for more information.
Kommentare zu diesen Handbüchern