ZyXEL Communications P-334WT Technical Information PDF herunterladen (Seite 165)

P-334WT to ZyWALL Tunneling

Setup P-334WT

Setup ZyWALL

Troubleshooting

View Log

This page guides us to setup a VPN connection between P-334WT and ZyWALL router. Please note that, in addition to P-334WT to

ZyWALL, P-334WT can also talk to other VPN hardwards. The tested VPN hardware are shown below.

● Cisco 1720 Router, IOS 12.2(2)XH, IP/ADSL/FW/IDS PLUS IPSEC 3DES

● NetScreen 5, ScreenOS 2.6.0r6

● SonicWALL SOHO 2

● WatchGuard Firebox II

● ZyXEL ZyWALL

● Avaya VPN

● Netopia VPN

● III VPN

As the figure shown below, the tunnel between P-334WT and ZyWALL ensures the packets flow between PC 1 and PC 2 are

secure. Because the packets go through the IPSec tunnel are encrypted. To achieve this VPN tunnel, the settings required for each P-

334WT and ZyWALL are explained in the following sections.

The IP addresses we use in this example are as shown below.

PC 1 P-334WT ZyWALL LAN 2

192.168.1.33

LAN: 192.168.1.1

WAN: 202.132.154.1

LAN: 192.168.2.1

WAN: 168.10.10.66

192.168.2.0/24

Note:

1. The following configurations are supposed both two VPN gateways have fixed IP addresses. If one of VPN gateways uses

dynamic IP, we enter 0.0.0.0 as the secure gateway IP address. In this case, the VPN connection can only be initiated from dynamic

side to fixed side to update its dynamic IP to the fixed side. However, if both gateways use dynamic IP addresses, it is no way to

establish VPN connection at all.

1 2 ... 160 161 162 163 164 165 166 167 168 169 170 ... 294 295

Keine Kommentare

ZyXEL Communications P-334WT Technical Information Seite 165