ZyXEL Communications P-334WT Technical Information PDF herunterladen (Seite 203)

Active

Press [SPACE BAR] to select Yes and press [Enter] to enable 802.1x user authentication through an external

RADIUS authentication server. Select No to enable authentication using ZyXEL AP internal authentication

server.

Server Address Enter the IP address of the external RADIUS authentication server.

Port

The default port of RADIUS server for authentication is 1812. You need not change this value unless your

network administrator instructs you to do so.

Shared Secret

Specify a password (up to 31 characters) as the key to be shared between external RADIUS authentication

server and ZyXEL AP (RADIUS client). The key is not send to the network. This key must be the same on the

external RADIUS authentication server and ZyXEL AP.

2. If accounting is required, you must setup the external RADIUS accounting server. Normally, RADIUS authentication server and

RADIUS accounting server are put in the same machine. However, they own separated UDP port and shared secret, you can separate

authentication and accounting service in two different RADIUS servers. You can refer to RADIUS authentication configuration.

If you use WEB Configurator, from the Web Configurator main menu, go to Main Menu/Wireless LAN/RADIUS to setup the RADIUS

authentication and accounting server configuration.

1 2 ... 198 199 200 201 202 203 204 205 206 207 208 ... 294 295

Keine Kommentare

ZyXEL Communications P-334WT Technical Information Seite 203