ZyXEL Communications P-334WT Technical Information PDF herunterladen (Seite 67)

Step 1. Enter 11 from the Main Menu.

Step 2. Move the cursor to the Edit IP field, press the [SPACEBAR] to toggle the default No to Yes,

then press [ENTER] to bring up Menu 11.3-Remote Node Network Layer Options.

The following table describes the options for Network Address Translation.

Field Options Description

Network Address

Translation

Full Feature

When you select this option the SMT will use

Address Mapping Set 1 (Menu 15.1-see later for

further discussion).

None NAT is disabled when you select this option.

SUA Only

When you select this option the SMT will use

Address Mapping Set 255 (Menu 15.1-see later for

further discussion). This option use basically Many-to-

One Overload mapping. Select Full Feature when

you require other mapping types. It is a convenient,

pre-configured, read only, Many-to-One mapping set,

sufficient for most purposes and helpful to people

already familiar with SUA in previous ZyNOS

versions. Note that there is also a Server type whose

IGA is 0.0.0.0 in this set.

Table: Applying NAT in Menu 4 and Menu 11.3

2. Configuring NAT

To configure NAT, enter 15 from the Main Menu to bring up the following screen.

Menu 15 - NAT Setup

1. Address Mapping Sets

2. Port Forwarding Setup

3. Trigger Port Setup

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 294 295

Keine Kommentare

ZyXEL Communications P-334WT Technical Information Seite 67