
IES-708-22A User’s Guide
345
CHAPTER 54
Virtual Channel Management
This chapter shows you how to use commands to configure virtual channels.
54.1 Virtual Channel Management Overview
See Chapter 13 on page 103 for background information on virtual channels and ATM QoS.
54.2 Virtual Channel Profile Commands
Use the following commands to configure virtual channel profiles.
54.2.1 Show Virtual Channel Profile Command
Syntax:
ras> shdsl vcprofile show [profile]
where
Displays the settings of the specified virtual channel profile (or all of them if you do not
specify one).
54.2.2 Set Virtual Channel Profile Command
Syntax:
ras> shdsl vcprofile set <vcprofile> <vc|llc> <ubr|cbr> <pcr> <cdvt>
ras> shdsl vcprofile set <vcprofile> <vc|llc> <vbr(rt-vbr)|nrt-vbr> <pcr>
<cdvt> <scr> <bt>
where
[profile] =
The name of the virtual channel profile (up to 31 English
keyboard characters).
<vcprofile> =
The name of the virtual channel profile (up to 31 English
keyboard characters). You cannot change the name of the
DEFVAL or DEFVAL_VC profiles.
<vc|llc> =
The type of encapsulation (vc or llc).
Kommentare zu diesen Handbüchern