
Chapter 56 ACL Commands
IES-612-51 User’s Guide
371
56.1.1 ACL Profile Set Command Example
This example creates an ACL rule example named test for traffic from VLAN 10 with a
priority level of 2. This rule limits the rate on the classified traffic to 1000 kbps and changes
the priority level to 7.
56.1.2 ACL Profile Show Map Command Example
This example displays the port mapping table for the “test” ACL profile.
56.1.3 ACL Profile Show Command Example
This example displays the detailed settings of the “test” ACL profile.
56.2 ACL Assignment Commands
Use these commands to apply ACL profiles to PVCs.
switch acl profile showmap
<name>
Displays the DSL port(s) to which the specified ACL profile is
applied.
L/L
switch acl profile show
[<name>]
Lists the names of every ACL profile or displays the detailed
settings of the specified ACL profile.
L/L
Table 150 ACL Commands
COMMAND DESCRIPTION P
ras> switch acl profile set test vlan 10 priority 2 rate 1000 rpri 7
ras> switch acl profile showmap test
profile: test
port type vpi vci
---- ------ --- -----
ras> switch acl profile show test
profile test:
rule:
vlan :10
priority:2
action:
rpri :7
rate :1000
Kommentare zu diesen Handbüchern