ZyXEL Communications Omni 288S Bedienungsanleitung PDF herunterladen (Seite 20)

novaPro32 Routel

Modem set-up

7000991003 Q2

Sauter Systems

4.3 Router modem & remote access

This configuration is not required for Routel operations.

This configuration has to be made only if the EYZ291 is set to Router mode

(Routel switch not set). In this case, the Router will not send any Init command to the

modem, which means in particular, that the modem will not be able to auto-adapt to the

baud rate of the Router and therefore needs to be configured manually.

Cable: Standard PC-to-modem cable, which is provided with the modem.

Æ This modem does not have to be installed within Windows.

Æ The examples (screen shots) are for a ZyXEL Omni288

1. Attach the modem concerned to your PC.

2. Set up a Hyper Terminal to use for this configuration:-

Click: Start | Programs | Accessories (WIN98: ‘Communication’), ‘Hyper Terminal’

and open ‘Hyperterminal.exe’ (If the Hyper Terminal program is missing on your PC,

you have to install it first. To do so, click Start | Settings | Control panel | Software |

Windows Set-up | Communication | Details and add ‘Hyper Terminal’.)

3. Name e.g.: ‘Config-RModem’, ‘OK’, ‘Connect using’: ‘Direct to COMx’ (where x is the

COM port to which the modem is connected) ‘OK’.

N.B.: This configuration has to be made only if the EYZ291 is set to Router

mode (Routel switch not set). See above.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 33 34

Keine Kommentare

ZyXEL Communications Omni 288S Bedienungsanleitung Seite 20