ZyXEL Communications VES-1012 - Betriebsanweisung PDF herunterladen (Seite 136)

VES-1000 Series Ethernet Switch

18-4 VLAN Setup

As previously mentioned, VLANs are unidirectional. Therefore, if you wish to allow two subscriber ports to talk

to each other, for example, between conference rooms in a hotel, you must define the egress (an egress port is an

outgoing port, that is, a port through which a data packet leaves) for both ports.

Port-based VLANs are specific only to the switch on which they were created. The factory default port-based

VLAN settings for VES-1000 Series switches are summarized below.

• Port 0 (the CPU management port) forms a VLAN with uplink ports and can use all Ethernet ports as the

uplink.

• The VDSL ports cannot talk to each other.

Each VDSL port forms a VLAN with the Ethernet ports and vice-versa.

Select

Port-Based as the VLAN Type in Menu 2 — Switch Setup.

Enter 17 from the main menu to go to Menu 17.1.1 — Port-Based VLAN Setup.

Figure 18-4 Menu 17.1.1 - Port Based VLAN Setup (VES-1012)

In this example, port 0 is the CPU port, ports 1 to 12 are the VDSL ports and ports 13 and 14 are the Ethernet

ports. The numbers in the top row denote the outgoing port for the corresponding port listed on the left (its egress

port). Move the cursor and press [ENTER] to change a port’s VLAN status. Refer to the chapter about switch-

related commands for more information on port-based VLAN configuration.

Table 18-3 VLAN Key

SYMBOL DESCRIPTION

= An equal sign denotes that this port is not a member of the associated VLAN group.

0 A zero denotes the port itself.

X An “X” indicates a port’s egress (outgoing port).

To allow two subscriber ports to talk to each other, you must define the egress for both ports.

Menu 17.1.1 - Port-Based VLAN Setup

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14

Port 0 O = = = = = = = = = = = = X X

Port 1 = O = = = = = = = = = = = X X

Port 2 = = O = = = = = = = = = = X X

Port 3 = = = O = = = = = = = = = X X

Port 4 = = = = O = = = = = = = = X X

Port 5 = = = = = O = = = = = = = X X

Port 6 = = = = = = O = = = = = = X X

Port 7 = = = = = = = O = = = = = X X

Port 8 = = = = = = = = O = = = = X X

Port 9 = = = = = = = = = O = = = X X

Port10 = = = = = = = = = = O = = X X

Port11 = = = = = = = = = = = O = X X

Port12 = = = = = = = = = = = = O X X

Port13 X X X X X X X X X X X X X O X

Port14 X X X X X X X X X X X X X X O

Press ENTER to Confirm or ESC to Cancel:

Egress port

Port numbers

1 2 ... 131 132 133 134 135 136 137 138 139 140 141 ... 226 227

Kommentare zu diesen Handbüchern

Keine Kommentare

ZyXEL Communications VES-1012 - Betriebsanweisung Seite 136

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung ZyXEL Communications VES-1012 -