ZyXEL Communications ZyWALL 70 Technical Information PDF herunterladen (Seite 116)

ZyWALL 1050 Support Notes

116

3. Configuration on ZyWALL 2 Plus

(1). LAN Network Setting

1. Login ZyWALL 2 Plus GUI and go to menu Network > LAN, change the IP address to

192.168.3.1/24 and DHCP IP pool starting address from 192.168.3.33. Then release the

original IP address on your PC and get the new IP address in 192.168.3.0/24 subnet assigned

by DHCP.

(2). WAN Network Setting

1. Switch to GUI menu Network > WAN, change the IP address to 59.124.163.152 with

subnet 255.255.255.224 and gateway 59.124.163.129 in this example. Other setting leaves as

default value.

Reminder: Please remember to configure the public DNS server at GUI menu Advanced >

DNS > System tab, to insert the correct DNS server accordingly at Name Server Record.

(3). Dial Backup Setting

1. Switch to GUI menu Network > WAN > Dial Backup tab

- Enable Dial Backup: enable

- Fill out the login name, password, phone number and dial backup port speed according to

your modem dial up settings.

- Click the Apply button

2. Telnet or login ZyWALL 2 Plus console and switch to menu 24.8 to enable the pingcheck

to detect the WAN connection availability.

- Execute the CLI command: sys rn pingcheck 1

3. Add the CLI to autoexec.net to make it always enabled even after device reboot.

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 297 298

Keine Kommentare

ZyXEL Communications ZyWALL 70 Technical Information Seite 116