ZyXEL Communications ZyWALL 70 Technical Information PDF herunterladen (Seite 205)

ZyWALL 1050 Support Notes

205

To make this scenario works the follow the configuration steps as stated below:

1) Login the ZyWALL 1050 GUI and setup the ge2 interface for internet connection and

manually assign a static IP. The configuration path is ZyWALL 1050 > Configuration >

Network > Interface > Edit > ge2

Please use this same method to assign IP for the LAN and DMZ interface.

2) Switch to Configuration > Network > Interface > Bridge, add a new Bridge Interface.

First we enable this interface and give it a name, place the available ports into the member

ports and make them become the member of this bridge interface. Moreover, don’t forget to

set the WAN IP information here since it is a “Bridge mode & Router (NAT) mode co-exist”

example and the NAT mode will need it. Here the bridge mode looks most likely a routing

bridge mode instead of the pure bridge mode. Thus, it needs an IP address. You may use the

same IP address that it used in the WAN interface, however you will get a warning message

like below.

If you got more than one IP, you can pick the other one here.

1 2 ... 200 201 202 203 204 205 206 207 208 209 210 ... 297 298

Keine Kommentare

ZyXEL Communications ZyWALL 70 Technical Information Seite 205