
ZyWALL 1050 Support Notes
36
All contents copyright (c) 2006 ZyXEL Communications Corporation.
1.2.2.3 ZyWALL with SonicWall VPN Tunneling
This section guides how to setup a VPN connection between the ZyWALL 1050 and
SonicWall TZ170.
As on the figure below, the tunnel between Central and Remote offices ensures the packet
flows between them are secure. This is because the packets flowing through the IPSec tunnel
are encrypted. The required settings to setup this VPN tunnel using ZyWALL and SonicWall
are stated in the following sections.
Static IP address
210.110.7.1
Static IP address
167.35.4.3
The central office gateway ZyWALL 1050’s interface and VPN setting retain the same settings
as in the previous example. If you jumped to this section first, please refer to ‘ZyWALL1050
to ZYWALL70 VPN tunnel setting’ on the page 8.
This list below is to briefly show the VPN phase1 and phase2 configuration parameters:
ZyWALL SonicWall
WAN: 210.110.7.1
LAN: 192.168.1.0/24
WAN: 167.35.4.3
LAN: 192.168.2.0/24
Phase 1
Negotiation Mode : Main
Pre-share key: 123456789
Encryption :DES
Authentication :MD5
Key Group :DH1
Phase 1
Negotiation Mode : Main
Pre-share key: 123456789
Encryption :DES
Authentication :MD5
Key Group :DH1
Central Office Gateway
ZyWALL
Branch Gateway
SonicWall TZ170
LAN: 192.168.1.X LAN: 192.168.2.X
Internet
Kommentare zu diesen Handbüchern