ZyXEL Communications ZyWALL 70 Technical Information PDF herunterladen (Seite 16)

ZyWALL 1050 Support Notes

3) Login to ZyWALL70 and go to Security > VPN > Gateway Policy, add a new gateway

policy to connect with central office’s ZyWALL 1050. My Address and Remote Gateway

Address are ZyWALL70 and ZyWALL 1050 WAN IP addresses. The Pre-Shared Key

configured on both sides must exactly the same Local ID Type & content and Peer ID

Type & content are reverse to the Local ZyWALL 1050.

4) The IKE Proposal is very important setting when configuring the VPN tunnel. The

proposal includes Negotiation Mode, Encryption and Authentication Algorithm and….

Make sure the IKE proposal parameters are must the same on both ends.

5) Switch to Configuration > Network > IPSec VPN > VPN Connection, add a new VPN

connection (IPSec phase2). Setup the Phase2 proposal and local and remote policies. The

chosen phase2 proposal chosen must be the same as on the remote site’s ZyWALL70.

6) In ZyWALL70, VPN is a rule based VPN. This means that whether the traffic is going to

the tunnel or not will depend on the local and remote policies. In this example,

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 297 298

Keine Kommentare

ZyXEL Communications ZyWALL 70 Technical Information Seite 16