
Chapter 20 Mgmt Config and System Restart Menu
MES-2110 User’s Guide
148
managers. Use this screen to configure the trap manager settings. Click Mgmt
Config > SNMP Config > IP Trap Manager to open the following screen.
Figure 81 Mgmt Config > SNMP Config > IP Trap Manager
The following table describes the labels in this screen.
20.4 The SNTP Screen
Use this screen to configure the time settings on the Switch. You can configure the
Switch to get the time and date information from a time server using Simple
Network Time Protocol (SNTP). You can also configure two servers. If the first one
is down, the Switch will try to connect to the second one.
Click Mgmt Config > SNTP to open the following screen.
Figure 82 Mgmt Config > SNTP
Table 64 Mgmt Config > SNMP Config > IP Trap Manager
LABEL DESCRIPTION
IP Address Enter the IP addresses of up to five managers to send your SNMP
traps to.
Community Name Enter the community string.
Status Use this to enable or disable the trap manager feature.
Undo Click this to restore your last saved settings.
Apply Click this to save your changes.
Kommentare zu diesen Handbüchern