ZyXEL Communications MES-2110 Betriebsanweisung PDF herunterladen (Seite 58)

Chapter 6 Configuration

MES-2110 User’s Guide

InBadOctets This field shows the number of bad octet frames received.

InUndersize This field shows the number of frames received that were too short

(shorter than 64 octets).

InFragments This field shows the number of frames received that were too short

(shorter than 64 octets) and were received with with Cyclical

Redundancy Check (CRC) errors.

InJabber This field shows the number of frames received with a length that

exceeds the maximum octet size and were received with CRC errors.

InOversize This field shows the number of frames received with a length that

was out of range.

The following fields show detailed information about frames transmitted.

OutUnicasts This field shows the number of good unicast frames transmitted.

OutBroadcasts This field shows the number of good broadcast frames transmitted.

Late This is the number of times a late collision is detected, that is, after

512 bits of the frames have already been transmitted.

Excessive This is a count of frames for which transmission failed due to

excessive collisions. Excessive collision is defined as the number of

maximum collisions before the retransmission count is reset.

Multiple This is a count of successfully transmitted frames for which

transmission was inhibited by more than one collision.

Single This is a count of successfully transmitted frames for which

transmission is inhibited by exactly one collision.

Deferred This is a count of frames for which transmission delayed due to busy

traffic. The deferred frames are waiting to be transmitted from the

Switch buffer. This counter only works for the half-duplex mode.

RX+TX

64 Octets This field shows the number of frames (including bad frames)

received that were 64 octets in length.

65to127 Octets This field shows the number of frames (including bad frames)

received that were between 65 and 127 octets in length.

128to255 Octets This field shows the number of frames (including bad frames)

received that were between 128 and 255 octets in length.

256to511 Octets This field shows the number of frames (including bad frames)

received that were between 256 and 511 octets in length.

512to1023 Octets This field shows the number of frames (including bad frames)

received that were between 512 and 1023 octets in length.

1024toMax Octets This field shows the number of frames (including bad frames)

received that were between 1024 and the maximum octets in length.

Table 11 Configuration > Rmon Status (continued)

LABEL DESCRIPTION

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 183 184

Keine Kommentare

ZyXEL Communications MES-2110 Betriebsanweisung Seite 58