ZyXEL Communications MES-2110 Betriebsanweisung PDF herunterladen (Seite 67)

Chapter 9 802.1x

MES-2110 User’s Guide

9.2 802.1x Global Configuration Screen

Use this screen to enable port authentication and a guest VLAN on the Switch.

Click Configuration > 802.1x > Global Configuration in the navigation panel

to display the screen as shown.

Figure 31 Configuration > Global Configuration

The following table describes the labels in this screen.

9.3 802.1x Radius Server Configuration Screen

Use this screen to configure the RADIUS server settings.

Table 14 Configuration > Global Configuration

LABEL DESCRIPTION

802.1x

Select Enable to activate the port authentication method on the

Switch. Otherwise, select Disable.

Reauth-Max Specify the number of times the Switch tries to authenticate client(s)

before sending unresponsive ports to the Guest VLAN.

This is set to 2 by default. That is, the

Switch attempts to authenticate

a client twice. If the client does not respond to the first

authentication request, the Switch tries again. If the client still

does not respond to the second request, the Switch sends the

client to the Guest VLAN. The client needs to send a new request

to be authenticated by the Switch again.

Guest VLAN Select Enable then enter the number that identifies the Guest VLAN.

Make sure this is the Guest VLAN recognized in your network.

Clients belonging to the guest VLAN can access unprotected areas in your

network, such as the Internet.

Select Disable if you do not want to use this feature.

Undo Click this to restore your last saved settings.

Apply

Click this to save your changes.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 183 184

Keine Kommentare

ZyXEL Communications MES-2110 Betriebsanweisung Seite 67