ZyXEL Communications GS3700 Series Betriebsanweisung PDF herunterladen (Seite 199)

Chapter 22 Multicast

GS3700/XGS3700 Series User’s Guide

199

screen to display the screen as shown. See Section 22.1 on page 184 for more information on

multicasting.

Figure 117 Advanced Application > Multicast > IPv6 Multicast > MLD Snooping-proxy > Filtering

The following table describes the labels in this screen.

Table 91 Advanced Application > Multicast > IPv6 Multicast > MLD Snooping-proxy > Filtering

LABEL DESCRIPTION

Active Select this option to enable MLD filtering on the Switch.

Port This field displays the port number.

* Settings in this row apply to all ports.

Use this row only if you want to make some settings the same for all ports. Use this row

first to set the common settings and then make adjustments on a port-by-port basis.

Note: Changes in this row are copied to all the ports as soon as you make them.

Group Limit Select this option to limit the number of multicast groups this port is allowed to join.

Max Group Num. Enter the number of multicast groups this port is allowed to join. Once a port is registered

in the specified number of multicast groups, any new MLD Report message is dropped on

this port.

Filtering Profile Select the name of the MLD filtering profile to use for this port. Otherwise, select Default

to prohibit the port from joining any multicast group.

You can create MLD filtering profiles in the Multicast > IPv6 Multicast > MLD

Snooping-proxy > Filtering > Filtering Profile screen.

Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses

these changes if it is turned off or loses power, so use the Save link on the top navigation

panel to save your changes to the non-volatile memory when you are done configuring.

Cancel Click Cancel to reset the fields to your previous configuration.

1 2 ... 194 195 196 197 198 199 200 201 202 203 204 ... 415 416

Keine Kommentare

ZyXEL Communications GS3700 Series Betriebsanweisung Seite 199