ZyXEL Communications GS3700 Series Betriebsanweisung PDF herunterladen (Seite 237)

Chapter 24 IP Source Guard

GS3700/XGS3700 Series User’s Guide

237

and source VLAN ID of the unauthorized ARP packet. To open this screen, click Advanced

Application > IP Source Guard > ARP Inspection.

Figure 141 IP Source Guard > ARP Inspection Status

The following table describes the labels in this screen.

Table 111 IP Source Guard > ARP Inspection Status

LABEL DESCRIPTION

Total number of

filters

This field displays the current number of MAC address filters that were created because

the Switch identified unauthorized ARP packets.

Index This field displays a sequential number for each MAC address filter.

MAC Address This field displays the source MAC address in the MAC address filter.

VID This field displays the source VLAN ID in the MAC address filter.

Port This field displays the source port of the discarded ARP packet.

Expiry (sec) This field displays how long (in seconds) the MAC address filter remains in the Switch.

You can also delete the record manually (Delete).

Reason This field displays the reason the ARP packet was discarded.

MAC+VLAN: The MAC address and VLAN ID were not in the binding table.

IP: The MAC address and VLAN ID were in the binding table, but the IP address was not

valid.

Port: The MAC address, VLAN ID, and IP address were in the binding table, but the port

number was not valid.

Delete Select this and click Delete to remove the specified entry.

Delete Click this to remove the selected entries.

Cancel Click this to clear the Delete check boxes above.

Change Pages Click Previous or Next to show the previous/next screen if all status information

cannot be seen in one screen.

1 2 ... 232 233 234 235 236 237 238 239 240 241 242 ... 415 416

Keine Kommentare

ZyXEL Communications GS3700 Series Betriebsanweisung Seite 237