
Chapter 36 System Remote Management
ZyWALL (ZLD) CLI Reference Guide
302
36.7.2 FTP Commands Examples
This command sets a service control rule that allowed the computers with the IP addresses
matching the specified address object to access the specified zone using FTP service.
This command displays FTP settings.
36.8 SNMP
Simple Network Management Protocol is a protocol used for exchanging management
information between network devices. Your ZyWALL supports SNMP agent functionality,
which allows a manager station to manage and monitor the ZyWALL through the network.
The ZyWALL supports SNMP version one (SNMPv1) and version two (SNMPv2c).
ip ftp server rule {rule_number|append|insert
rule_number} access-group {ALL|address_object}
zone {ALL|zone_object} action {accept|deny}
Sets a service control rule for FTP service.
address_object: The name of the IP address
(group) object. You may use 1-31 alphanumeric
characters, underscores(
_), or dashes (-), but the
first character cannot be a number. This value is
case-sensitive.
zone_object: The name of the zone. For the
ZyWALL USG 300 and above, use up to 31
characters (a-zA-Z0-9_-). The name cannot start
with a number. This value is case-sensitive.
The ZyWALL USG 100 and 200 models use pre-
defined zone names like DMZ, LAN1, SSL VPN,
WLAN, IPSec VPN, OPT, and WAN.
ip ftp server rule move rule_number to
rule_number
Changes the index number of a service control
rule.
no ip ftp server rule rule_number Deletes a service control rule for FTP service.
show ip ftp server status Displays FTP settings.
Table 169 Command Summary: FTP (continued)
COMMAND DESCRIPTION
Router# configure terminal
Router(config)# ip ftp server rule 4 access-group Sales zone WAN action
accept
Router# configure terminal
Router(config)# show ip ftp server status
active : yes
port : 21
certificate: default
TLS : no
service control:
No. Zone Address Action
========================================================================
Kommentare zu diesen Handbüchern