ZyXEL Communications ZYWALL 1050 - V2.00 EDITION 1 Betriebsanweisung PDF herunterladen (Seite 69)

Chapter 6 Interfaces

ZyWALL (ZLD) CLI Reference Guide

[no] budget data active {download-

upload|download|upload}

<1..100000>

Sets how much downstream and/or upstream data (in Mega

bytes) can be transmitted via the 3G connection within one

month.

download: set a limit on the downstream traffic (from the ISP

to the ZyWALL).

upload: set a limit on the upstream traffic (from the ZyWALL

to the ISP).

download-upload: set a limit on the total traffic in both

directions.

If you change the value, the ZyWALL resets the statistics.

Use the no command to disable data budget control.

budget reset-day <0..31> Sets the date on which the ZyWALL resets the budget every

month. If the date you selected is not available in a month,

such as 30th or 31th, the ZyWALL resets the budget on the

last day of the month.

budget reset-counters Resets the time and data budgets immediately. The count

starts over with the 3G connection’s full configured monthly

time and data budgets. This does not affect the normal

monthly budget restart.

budget {log|log-alert}[recursive

<1..65535>]

Sets the ZyWALL to create a log (log) or an alert log (log-

alert) when the time or data limit is exceeded. You can also

specify how often (from 1 to 65535 minutes) to generate a log

or an alert.

no budget log [recursive] Sets the ZyWALL to not create a log when the time or data

limit is exceeded. Specify recursive to have the ZyWALL

only create a log one time when the time or data limit is

exceeded.

budget new-connection

{allow|disallow}

Sets to permit (allow) or drop/block (disallow) new 3G

connections when the time or data limit is exceeded.

budget current-connection

{keep|drop}

Sets to maintain the existing 3G connection (keep) or

disconnect it (drop) when the time or data limit is exceeded.

You cannot set budget new-connection to allow and budget

current-connection to drop at the same time.

If you set budget new-connection to disallow and budget

current-connection to keep, the ZyWALL allows you to

transmit data using the current connection, but you cannot

build a new connection if the existing connection is

disconnected.

budget percentage {ptime|pdata}

<0..99>

Sets a percentage (0~99) of time budget (ptime) or data

(pdata) limit. When the specified limit is exceeded, the

ZyWALL takes the action configured using the budget

{log-percentage|log-percentage-alert}

command.

budget {log-percentage|log-

percentage-alert} [recursive

<1..65535>]

Sets to have the ZyWALL create a log (log-percentage) or

an alart log (log-percentage-alert) when the set

percentage of time budget or data limit is exceeded. You can

configure the percentage using the budget percentage

command.

You can also set how often (from 1 to 65535 minutes) to send

the log or alert.

Table 27 Cellular Interface Commands (continued)

COMMAND DESCRIPTION

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 385 386

Kommentare zu diesen Handbüchern

Keine Kommentare

ZyXEL Communications ZYWALL 1050 - V2.00 EDITION 1 Betriebsanweisung Seite 69

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Gateways / Controller ZyXEL Communications ZYWALL 1050 - V2.00 EDITION 1