ZyXEL Communications ZYWALL 1050 - V2.00 EDITION 1 Betriebsanweisung PDF herunterladen (Seite 76)

Chapter 6 Interfaces

ZyWALL (ZLD) CLI Reference Guide

security wpa <tkip | aes> eap

internal profile-name tls-cert

certificate name

Configures WPA enterprise security using TKIP or AES and

an existing AAA authentication method object (profile-

name). Set the certificate the ZyWALL uses to authenticate

itself to the wireless clients. The wireless clients must use

TTLS authentication protocol and PAP inside the TTLS

secure tunnel.

security wpa <tkip | aes> eap

external

Configures WPA enterprise security using TKIP or AES and

an external server. Use the security external command

to specify the server’s address.

security wpa <tkip | aes> psk key

psk-key

Configures WPA security using TKIP or AES and a Pre-

Shared Key (PSK).

security wpa-wpa2 <tkip | aes> eap

internal profile-name tls-cert

certificate name

This allows users to either use WPA or WPA2 enterprise

security to connect to the wireless interface. You have to also

configure to use either TKIP or AES and an existing AAA

authentication method object (profile-name). Set the

certificate the ZyWALL uses to authenticate itself to the

wireless clients. The wireless clients must use TTLS

authentication protocol and PAP inside the TTLS secure

tunnel.

security wpa-wpa2 <tkip | aes> eap

external

Configures WPA or WPA2 enterprise security using TKIP or

AES and an external server. Use the security external

command to specify the server’s address.

security wpa-wpa2 <tkip | aes> psk

key psk-key

Configures WPA or WPA2 security using TKIP or AES and a

Pre-Shared Key (PSK).

security wpa2 <tkip | aes> eap

internal profile-name tls-cert

certificate name

Configures WPA2 enterprise security using TKIP or AES and

an existing AAA authentication method object (profile-

name). Select the certificate the ZyWALL uses to authenticate

itself to the wireless clients. The wireless clients must use

TTLS authentication protocol and PAP inside the TTLS

secure tunnel.

security wpa2 <tkip | aes> eap

external

Configures WPA2 enterprise security using TKIP or AES and

an external server. Use the security external command

to specify the server’s address.

security wpa2 <tkip | aes> psk key

psk-key

Configures WPA2 security using TKIP or AES and a Pre-

Shared Key (PSK).

[no] security dot1x acct ip port

<1..65535>

Sets the IP address and port number of an external

accounting server.

[no] security dot1x auth ip port

<1..65535>

Sets the IP address and port number of an external

authentication (RADIUS) server.

[no] security dot1x activate Enables IEEE 802.1x accounting and authentication.

[no] security external acct ip port

<1..65535>

Sets the IP address and port number of an external

accounting server.

[no] security external auth ip port

<1..65535>

Sets the IP address and port number of an external

authentication (RADIUS) server.

no security {none | wep | wpa |

wpa-wpa2 | wpa2}

Disables the specified security mode for the wireless

interface.

ssid ssid Sets the (Service Set IDentity). This identifies the Service Set

with which a wireless station is associated. Wireless stations

associating to the ZyWALL must have the same SSID.

ssid: Use up to 32 printable 7-bit ASCII characters as a

name for the wireless LAN.

Table 31 WLAN Interface Commands (continued)

COMMAND DESCRIPTION

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 385 386

Kommentare zu diesen Handbüchern

Keine Kommentare

ZyXEL Communications ZYWALL 1050 - V2.00 EDITION 1 Betriebsanweisung Seite 76

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Gateways / Controller ZyXEL Communications ZYWALL 1050 - V2.00 EDITION 1