ZyXEL Communications IES-1248-51 Betriebsanweisung PDF herunterladen (Seite 177)

100

101

Chapter 20 IGMP

IES-1248-51V User’s Guide

177

20.5 Bandwidth Port Setup Screen

Use this screen to set up multicast bandwidth requirements for specific ports. To

open this screen, click Advanced Application > IGMP > Bandwidth Port.

Figure 82 Bandwidth Port Setup

Apply Click Apply to save the filter settings. The settings then display in the

summary table at the bottom of the screen.

Clicking Apply saves your changes to the IES-1248-51V’s volatile

memory. The IES-1248-51V loses these changes if it is turned off or

loses power, so use the Config Save link on the navigation panel to

save your changes to the non-volatile memory when you are done

configuring.

Cancel Click Cancel to begin configuring the fields afresh.

This table shows the multicast range settings.

Index This field displays the number that identifies this setting.

Start Multicast IP This field displays the beginning of the multicast range.

End Multicast IP This field displays the end of the multicast range.

Bandwidth This field displays the allowed bandwidth for the specified multicast

range.

Select Select this, and click Delete to remove the setting.

Delete Click this to remove the selected settings.

Select All Click this to select all entries in the table.

Select None Click this to un-select all entries in the table.

Table 37 IGMP Bandwidth (continued)

LABEL DESCRIPTION

1 2 ... 172 173 174 175 176 177 178 179 180 181 182 ... 653 654

Kommentare zu diesen Handbüchern

Keine Kommentare

ZyXEL Communications IES-1248-51 Betriebsanweisung Seite 177

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung ZyXEL Communications IES-1248-51