ZyXEL Communications IES-1248-51 Betriebsanweisung PDF herunterladen (Seite 452)

100

101

Chapter 62 IP Bridge Commands

IES-1248-51V User’s Guide

452

62.2 IP Bridge Domain Commands

Use these commands to set up and maintain domains in IP bridges.

join|leave Specifies whether you want to add the specified VLAN to (join) or

remove the specified VLAN from (leave) the domain.

ip-address IP address, in dotted decimal notation.

mask-bits Number of bits <1~32> in the subnet mask.

nexthop IP address, in dotted decimal notation.

metric The metric <1~15> represents the “cost” of transmission for routing

purposes. IP routing uses hop count as the measurement of cost, with

a minimum of 1 for directly-connected networks. Select the number

that approximates the cost for this link The number need not be

precise, but it must be between 1 and 15. In practice, 2 or 3 is usually

a good number.

If two entries have the same metric, the IES-1248-51V uses the one

with the lower IP address.

priority The IEEE 802.1p priority value <0~7>.

port The port number of the PVC.

vpi The VPI of the PVC.

vci The VCI of the PVC.

port-list You can specify a single ADSL port <1>, all ADSL ports <*> or a list of

ADSL ports <1,3,5>. You can also include a range of ports

<1,5,6~10>.

DS vcprofile Assign a VC profile to use for this channel’s downstream traffic shaping.

[,US

vcprofile]

Assign a VC profile to use for policing this channel’s upstream traffic.

The IES-1248-51V does not perform upstream traffic policing if you do

not specify an upstream VC profile.

super|<vlan-

id>

Enable the super channel option to allow a channel forward frames

belonging to multiple VLAN groups (that are not assigned to other

channels). The IES-1248-51V forwards frames belonging to VLAN

groups that are not assigned to specific channels to the super channel.

The super channel functions in the same way as the channel in a single

channel environment. One port can have only one super channel.

The default VID (1 to 4094). Each PVC must have a unique VID since

the IES-1248-51V forwards traffic back to the subscribers based on the

VLAN ID.

You must assign a default VID (1 to 4094) and IEEE 802.1p default

priority (0 to 7) to normal channels. Each PVC must have a unique VID

(since the IES-1248-51V forwards traffic back to the subscribers based

on the VLAN ID).

ipoa|ipoe Specifies whether the PVC is running on Ethernet (ipoe) or on ATM

(ipoa).

Table 173 IP Bridge Command Input Values (continued)

LABEL DESCRIPTION

1 2 ... 447 448 449 450 451 452 453 454 455 456 457 ... 653 654

Kommentare zu diesen Handbüchern

Keine Kommentare

ZyXEL Communications IES-1248-51 Betriebsanweisung Seite 452

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung ZyXEL Communications IES-1248-51