
Chapter 45 VoIP
IES-1248-51V User’s Guide
342
45.7.2 MLT Relay
Use this screen to allow or prohibit line tests using diagnostic equipment
connected via the Test In and Test Out ports on the IES-1248-51V. Click VoIP
> Diagnostic > MLT Relay. The following screen displays.
Figure 158 VoIP > Diagnostic > MLT Relay
The following table describes the labels in this screen.
Table 120 VoIP > Diagnostic > MLT Relay
LABEL DESCRIPTION
Mode Select the MLT test relay mode:
OFF: forbid MLT relay testing.
Test In: allow diagnostic inner loop tests to be initiated by an
external device.
Test Out: allow diagnostic outer loop tests to be initiated by
an external device.
Both: allow both inner and outer loop diagnostic tests to be
initiated by an external device.
Port Select the port on which you want the test to be made.
Timeout Enter the number of minutes and seconds that passes before
the device stops testing if it gets no diagnostic response.
Forced Select this to force the diagnostic test.
Apply Click this to save your changes.
Cancel Click this to return this screen to its last saved settings.
Kommentare zu diesen Handbüchern