
Chapter 58 IGMP Commands
IES-1248-51V User’s Guide
429
58.4 IGMP Bandwidth Port Commands
Use the IGMP bandwidth port commands to set up bandwidth budgets for
multicast traffic on specific ports.
switch igmpsnoop bandwidth set
<index> <start-mcast-ip> <end-
mcast-ip> <rate>
Configures bandwidth allocation for the multicast
channel(s). For multicast channel(s) for which you
have not configured bandwidth settings, the default
multicast bandwidth setting applies (see the switch
igmpsnoop bandwidth default command).
index: 1~96; a unique number for this setting.
start-mcast-ip: 224.0.0.0~239.255.255.255; the
beginning of the multicast range.
end-mcast-ip: 224.0.0.0~239.255.255.255; the end
of the multicast range. It must be greater than <start-
mcast-ip>.
rate: 1~100000, in units of kbps
H/H
switch igmpsnoop bandwidth
delete <index>
Removes the specified multicast bandwidth
configuration profile.
H/H
switch igmpsnoop bandwidth show Displays bandwidth budget for multicast IP channels
configured on the IES-1248-51V.
M/L
Table 157 IGMP Bandwidth Command Summary (continued)
COMMAND DESCRIPTION P
Table 158 IGMP Bandwidth Port Command Summary
COMMAND DESCRIPTION P
switch igmpsnoop bandwidth port
disable <portlist>
Deactivates multicast bandwidth settings of the
specified port.
portlist: You can specify a single xDSL port <1>, all
xDSL ports <*> or a list of xDSL ports <1,3,5>. You
can also include a range of ports <1,5,6~10>.
H/H
switch igmpsnoop bandwidth port
enable <portlist>
Activates multicast bandwidth setting on the specified
port.
H/H
switch igmpsnoop bandwidth port
set <portlist> <rate>
Sets the bandwidth allowed for multicast traffic on the
specified port(s). It does not automatically enable it,
however.
rate:
1~100000, in units of kbps
H/H
switch igmpsnoop bandwidth port
show <portlist>
Displays the multicast bandwidth setting on the
specified port(s) and whether or not this setting is
active. The following example displays the bandwidth
budget for port 1.
M/L
Kommentare zu diesen Handbüchern