ZyXEL Communications IES-1248-51 Betriebsanweisung PDF herunterladen (Seite 394)

Chapter 54 DHCP Commands

IES-1248-51V User’s Guide

394

switch dhcprelay optionmode

<vid|all> <private|tr101>

Sets the IES-1248-51V to use the Private or

TR-101 mode to add the DHCP relay option

82 information to packets being transmitted

for the specified VLAN. See Section 28.2 on

page 217 for more information.

M/H

switch dhcprelay server set

<vid> <primary-server>

[secondary-server]

This command specifies the DHCP server(s)

that serve the specified VLAN. The primary

server is required; the secondary server is

optional. The IES-1248-51V routes DHCP

requests to the specified DHCP server(s)

according to the relaymode.

Use VLAN ID 0 to set up the default DHCP

server(s) for all non-listed VLAN.

vid: The ID of the VLAN to which to apply

the setting.

primary-server: The IP address of one

DHCP server.

secondary-server: The IP address of a

second DHCP server.

M/H

switch dhcprelay server delete

<vid|all> [primary-server]

This command deletes all information about

DHCP servers for the specified VLAN or for all

VLANs. Afterwards, the specified VLAN can

uses the default DHCP server(s) set up for

VLAN ID 0, if any.

primary-server: The IP address of one

DHCP server.

M/H

Table 141 DHCP Relay Commands (continued)

COMMAND DESCRIPTION P

1 2 ... 389 390 391 392 393 394 395 396 397 398 399 ... 653 654

Kommentare zu diesen Handbüchern

Keine Kommentare