ZyXEL Communications IES-1248-51 Betriebsanweisung PDF herunterladen (Seite 545)

Chapter 68 VoIP Commands

IES-1248-51V User’s Guide

545

68.4 voip diagnostic Commands

Use these commands to perform a variety of standard Metallic Line Tests on the

subscriber ports.

Table 209 voip diagnostic Commands

COMMAND DESCRIPTION P

voip diagnostic mlt test

<port> <option> [force]

This command performs a variety of standard

Metallic Line Tests on the specified connection.

Perform specified MLT test item in specified

subscriber(s)

port: Port number, 1~48

option

: The type or types of test to be run.

Allowed values are:

all: Perform all tests on the line connected

to the specified port.

vac: Test the line’s AC voltage only.

vdc: Test the line’s DC voltage only.

rload: Test the line’s load resistance only.

riso: Test the line’s isolation resistance

only.

cap: Test the line’s capacitance only.

ren: Test the line’s ringer equivalent

number only.

ring: Test the line’s ring voltage only.

metering: Test the line’s metering voltage

only.

dialtone: Test dialtone

digit: Test digit

roh: Test ROH which is a tone sent at the

end of a call to indicate that the other party

has hung up.

user: User input DTMF tone

force:

Perform the test(s) immediately,

even if the specified port is in use.

M/

H

voip diagnostic mlt show

<port>

This command displays the results of the last

Metallic Line Test that was run on the specified

port.

L/L

1 2 ... 540 541 542 543 544 545 546 547 548 549 550 ... 653 654

Kommentare zu diesen Handbüchern

Keine Kommentare