ZyXEL Communications IES-1248-51 Betriebsanweisung PDF herunterladen (Seite 487)

100

101

Chapter 64 ADSL Commands

IES-1248-51V User’s Guide

487

adsl linediag setld <port> Performs line diagnostics on the specified port. The

ADSL port must be set to ADSL2 or ADSL2+ ADSL

operational mode and have a connection. It takes

about one minute for the line diagnostics to finish.

H/H

adsl linediag getld <port> Displays the line diagnostics results after using the line

diagnostics set command on an ADSL port. Use the

line diagnostics results to analyze problems with the

physical ADSL line.

Note: Wait at least one minute after using the line

diagnostic set command before using this

command.

L/L

adsl linediag getld992-3 <port> Displays the line diagnostics results in the format

defined in the ITU-T G.992.3 standard after using the

line diagnostics set command on an ADSL port. Use

the line diagnostics results to analyze problems with

the physical ADSL line.

Note: Wait at least one minute after using the line

diagnostic set command before using this

command.

L/L

adsl linediag setselt <port> Performs a single end line test on the specified port.

This test checks the distance to the subscriber’s

location.

Note: The port must have an open loop. There

cannot be a DSL device, phone, fax machine

or other device connected to the subscriber’s

end of the telephone line.

H/H

adsl linediag getselt <port> Displays the status and the results of the SELT test on

the specified port. The report tells you what gauge of

telephone wire is connected to the port and the

approximate length of the line measured both in

meters and thousands of feet.

L/L

adsl linediag toneDiag <port> Displays the tone diagnostics for a port in the format

defined in the ITU-T G.992.3 standard. You do not

need to use the line diagnostics set command first. Use

the tone diagnostics to analyze problems with the

physical ADSL line.

L/L

adsl ipbpvc arpproxy agingtime

set <sec>

Sets the valid time interval of a learned MAC address.

10~10000 seconds.

H/H

adsl ipbpvc arpproxy agingtime

show

Display the current time interval of a learned MAC

address.

M/L

adsl ipbpvc arpproxy flush all |

edgerouter [<ip><vid>]|interface

[<ip>/<mask><vid>]

Flush the learned MAC addresses manually. H/H

Table 186 ADSL Statistics Commands (continued)

COMMAND DESCRIPTION P

1 2 ... 482 483 484 485 486 487 488 489 490 491 492 ... 653 654

Kommentare zu diesen Handbüchern

Keine Kommentare

ZyXEL Communications IES-1248-51 Betriebsanweisung Seite 487

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung ZyXEL Communications IES-1248-51