ZyXEL Communications IES-1248-51 Betriebsanweisung PDF herunterladen (Seite 571)

100

101

Chapter 70 Troubleshooting

IES-1248-51V User’s Guide

571

70.9 Local Server

The computer behind a DSL modem or router cannot access a local server

connected to the IES-1248-51V.

5 The port may be set to use the wrong DSP profile or Termination name.

•Use the voip port show <port> command to check the port configuration.

•Use the voip port h248 set <port> <dsp-profile> command to set the

port to use the correct DSP profile.

•Use the voip port h248 termination <port> <name> command to set the

port the use the correct Termination name.

6 The DSP profile may be misconfigured.

•Use the voip profile dsp show [name] command to check the DSP

profile.

7 Check any hardware between the phone and the IES-1248-51V. Try using

another telephone, another port on the IES-1248-51V, or both. Run the MLT

(Metallic Line Test) on the relevant port (use the diagnostic mlt test

commands).

Table 223 Phonecall Troubleshooting

STEPS CORRECTIVE ACTION

Table 224 Troubleshooting a Local Server

STEPS CORRECTIVE ACTION

1See Section 70.6 on page 569 to make sure that the subscriber is able to

transmit to the IES-1248-51V.

2 Make sure the computer behind the DSL device has the correct gateway IP

address configured.

3 Check the VLAN configuration (see Chapter 19 on page 163).

4 Check the cable and connections between the IES-1248-51V and the local

server.

5 Try to access another local server.

If data can be transmitted to a different local server, the local server that

could not be accessed may have a problem.

1 2 ... 566 567 568 569 570 571 572 573 574 575 576 ... 653 654

Kommentare zu diesen Handbüchern

Keine Kommentare

ZyXEL Communications IES-1248-51 Betriebsanweisung Seite 571

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung ZyXEL Communications IES-1248-51