
Chapter 64 ADSL Commands
IES-1248-51V User’s Guide
482
adsl profile map <portlist>
<profile>
<glite|gdmt|t1413|auto|adsl2|ads
l2+>
Assigns a specific profile to an individual port and sets
the port’s ADSL mode (or standard). The profile
defines the maximum and minimum upstream/
downstream rates, the target upstream/downstream
signal noise margins, and the maximum and minimum
upstream/downstream acceptable noise margins of all
the ADSL ports to which you assign the profile.
glite|gdmt|t1413|auto|adsl2|adsl2+: The ADSL
operational mode.
When set to auto, the port follows whatever mode is
set on the other end of the line.
Note: When the mode is set to auto, the
connection rates are governed by the
negotiated ADSL mode regardless of the
rates configured in the profile. For example, if
the profile is set to use a rate of 18000 Kbps,
that speed is only supported if the negotiated
ADSL mode is ADSL 2+. Any other ADSL
mode will limit the rate to what is supported
by the specific ADSL standard.
H/H
adsl ipbpvc arpproxy agingtime
set <sec>
Sets the valid time interval of a learned MAC address
(10~10000 seconds).
H/H
adsl ipbpvc arpproxy agingtime
show
Display the current time interval of a learned MAC
address.
M/L
adsl ipbpvc arpproxy flush all |
edgerouter [<ip><vid>]|interface
[<ip>/<mask><vid>]
Flush the learned MAC addresses manually. H/H
adsl ipbpvc arpproxy show
[domain <domain> [edgerouter
[<ip><vid>]]|[interface[<ip>/
<mask><vid>]]]
Displays learnt MAC table for a domain Displays learnt
MAC table for all/an edge router in a domain Displays
learnt MAC table for all/an interface in a domain.
M/L
adsl ipbpvc delete <portlist>
<vpi><vci>
Remove IP aware Bridge PVC. H/H
adsl ipbpvc domain delete
<domain-name>
Delete a domain, have to delete all VLANs belonging to
this domain first.
H/H
adsl ipbpvc domain dhcpvlan
disable <domain-name>
Disable DHCP VLAN in a domain. H/H
adsl ipbpvc domain dhcpvlan
enable <domain-name> <vid>
Enable DHCP VLAN in a domain. H/H
adsl ipbpvc domain set <domain-
name>
Create domain, maximum 8 domains in the system. H/H
adsl ipbpvc domain show
[<domain-name>]
Display domain setting. M/L
adsl ipbpvc domain vlan <domain-
name><vid><registration>
Set vlan to join or leave specified domain, maximum 8
VLANs in one domain.
H/H
Table 185 ADSL Profile Commands (continued)
COMMAND DESCRIPTION P
Kommentare zu diesen Handbüchern